Clinker products offer holistic solutions on building facades, poolsides and outdoors, together with stair steps and accessories. With its water absorption criterion of less than 0.5%, Clinker has superior advantages over its equivalent products (cotto, brick, etc.). This value means Clinker products that have porcelain characteristics; makes it an option that is resistant to frost, has high physical resistance, does not fade, has a natural look and has superior qualities.
SCOPE OF APPLICATION
On the facades of multi-storey buildings.
APPLICATION METHOD
Drawing of the layout project that will provide minimum cutting in Klinker Slim Facade Tile.
In accordance with the project, approximately 10 cm from the building surface, in vertical axes.
creation of aluminum substructure.
Insert the Klinker Slim Facade Tile into the holes on the vertical profiles with aluminum clips.
hanging with mm joint.
THERMAL INSULATION
If desired, extruded polystyrene foam between the building surface and the granite ceramic or
Application of thermal insulation with glass wool covered rockwool.
DIMENSIONS OF GRANITE CERAMIC USED (May vary according to the manufacturer)
20×40, 20×45, 20×60, 20×80, 30×60, 30×90
SYSTEM WEIGHT (May vary by application)
- Ceramic weight (35 kg/m2)
- Construction weight (3 – 4 kg/m2)
